AUTOMOTRIZ

Ordenar por: Sentido::
  •  CONTROLDESK® NEXT GENERATION

    CONTROLDESK® NEXT GENERATION

    Universal modular experiment and instrumentation software for electronic control unit (ECU) development.
    ControlDesk Next Generation is the dSPACE experiment software for seamless ECU development.

     

  • MODEL COMPARE

    MODEL COMPARE

    Comparison of Simulink®, Stateflow®, and TargetLink® models.                                 

    Model Compare finds all the changes in a model. Even large models can be compared in minutes, which would be practically impossible without the tool. Automatic comparison is a must whenever you work with multiple versions of a model.

  •  ECU INTERFACE MANAGER

    ECU INTERFACE MANAGER

    Service-based bypassing without ECU source code modifications.
    The ECU Interface Manager is an easy-to-use tool for quickly integrating bypass hooks for internal and external bypassing directly into the ECU software. Thus, special software versions from the ECU supplier are no longer needed.  

  • MODELDESK

    MODELDESK

    Graphical user interface for parameterization & simulation. ModelDesk is a graphical user interface for simulation, intuitive model parameterization, and parameter set management. It also provides project handling and allows parameter sets to be downloaded to offline and online simulations.

  •  POWER REALTIME LIBRARY

    POWER REALTIME LIBRARY

    Easy real-time simulation of power electronics circuits developed with SimPowerSystems™.

    The dSPACE Power RealTime Library can be used for the real-time calculation of electrical models developed in SimPower­Systems.

  • MOTIONDESK

    MOTIONDESK

    MotionDesk helps you get more out of your HIL simulator, visualizing your simulation in virtual worlds that exactly represent the simulation scenarios. You can store the animations as experiment files and record video files to document and illustrate your developments. 

  •  RTI-MP

    RTI-MP

    For graphical setup of multiprocessor structures.

    The multiprocessor option for Real-Time Interface (RTI-MP) supports multiprocessor and multicore systems based on dSPACE‘s modular hardware and helps increase the performance of real-time simulations.

  • NGRAIN SDK

    NGRAIN SDK

    At the heart of the NGRAIN platform is the NGRAIN SDK, housing NGRAIN's patented 3D volumetric rendering engine. With over 12 years of continuous research and development, NGRAIN is capable of visualizing massive amounts of data in mobile, wearable, desktop, and immersive virtual environments.

  • ADAS RP BLOCKSET

    ADAS RP BLOCKSET

    Developing map-based driver assistance systems. Working together with HERE, dSPACE has created an integrated tool chain for developing map-based driver assistance systems based on an electronic horizon. HERE's development tool ADAS Research Platform (ADAS RP) provides the electronic horizon, and communication with the dSPACE systems runs via a UDP/IP interface.

  • NGRAIN VERGENCE

    NGRAIN VERGENCE

    NGRAIN Vergence makes it incredibly easy to develop and deploy augmented reality and interactive 3D content across your business. With its simple and easy-to-learn graphical user interface, NGRAIN Vergence lets you import 3D content from virtually any source, and link it to data of all kinds, including part specifications, inventory information, images, videos, instructional content, and more.

  • ADASIS V2 HORIZON RECONSTRUCTOR BLOCKSET

    ADASIS V2 HORIZON RECONSTRUCTOR BLOCKSET

    Developing and testing map-based driver assistance systems by using the ADASIS v2 protocol. By using the ADASIS v2 Horizon Reconstructor Blockset together with dSPACE’s PC-based simulation platform VEOS®, the MicroAutoBox or AutoBox rapid prototyping system.                                                                        

  • PANELS FOR SINGLE-BOARD-HARDWARE

    PANELS FOR SINGLE-BOARD-HARDWARE

    Easy access to I/O signals with BNC and Sub-D connectors.

     

     

                                                    

     

  • AUTOBOX/TANDEM-AUTOBOX

    AUTOBOX/TANDEM-AUTOBOX

    AutoBox is the ideal enclosure for using your modular dSPACE real-time system for in-vehicle control experiments such as test drives in the development of powertrains, ABS or chassis control. You can install AutoBox quite easily in your test car, for example, in the trunk or the passenger cabin.                                

  • PLATFORM API PACKAGE

    PLATFORM API PACKAGE

    Application programming interfaces for connecting to dSPACE platforms.
    The Platform API Package is a set of libraries for accessing dSPACE real-time platforms and dSPACE VEOS. It provides a convenient way to download and start or stop models and also gives high-level access to the model variables for reading, writing, stimulating, capturing, etc.

  • AUTOMATIONDESK

    AUTOMATIONDESK

    Powerful test authoring and automation tool
    With AutomationDesk, tests can be executed 24 hours a day, seven days a week, letting engineers increase test coverage and improve ECU software quality while saving time and costs.

     

  • RAPIDPRO HARDWARE

    RAPIDPRO HARDWARE

    Flexible hardware for rapid control prototyping.  

    RapidPro is a very compact, robust and modular hardware that extends dSPACE RCP systems with configurable automotive signal conditioning and power stages. dSPACE also provides optimum support for other application areas.

  • CONFIGURATIONDESK®

    CONFIGURATIONDESK®

    Configuration and implementation software for dSPACE SCALEXIO® hardware. ConfigurationDesk is an intuitive, graphical configuration and implementation tool, ideal for handling large HIL real-time applications based on SCALEXIO hardware, and for implementing behavior models and I/O function code on SCALEXIO hardware.                                                                                                      

  • REAL-TIME INTERFACE (RTI)

    REAL-TIME INTERFACE (RTI)

    Implementation software for running models on dSPACE hardware.
    RTI lets you concentrate fully on the actual design process and carry out fast design iterations. It extends the C code generator Simulink Coder™ (formerly Real-Time Workshop®) for the seamless, automatic implementation of your Simulink and Stateflow models on the real-time hardware.

  • dSPACE ADTF INTERFACE BLOCKSET

    dSPACE ADTF INTERFACE BLOCKSET

    Developing Driver Assistance Systems with Environment Sensors.

    The ADTF Interface Blockset from dSPACE is used to implement bidirectional, low-latency communication between EB Assist ADTF and dSPACE’s PC-based simulation platform VEOS® or dSPACE real-time systems via the ADTF Message Bus.                                                                               

  • REAL-TIME INTERFACE BYPASS BLOCKSET

    REAL-TIME INTERFACE BYPASS BLOCKSET

    ECU interfacing for rapid control prototyping and intrusive testing of existing ECU software. The dSPACE tool chain for bypassing and ECU interfacing, consisting of the RTI Bypass Blockset and the ECU Interface Manager, can be used for applications in rapid control prototyping as well as for white-box testing of existing ECU software.

  • dSPACE CALIBRATION AND BYPASSING SERVICE

    dSPACE CALIBRATION AND BYPASSING SERVICE

    Measurement, calibration, bypassing, and ECU flash programming. 
    The dSPACE Calibration and Bypassing Service lets you run measurement, calibration, bypassing, and ECU flash programming tasks. The service implementation on the ECU can be tailored with regard to functionality and resource consumption.

  • REAL-TIME TESTING

    REAL-TIME TESTING

    Python-based real-time test automation.

    Python-based test automation – 100% reproducible real-time tests executed synchronously with simulation model. The scripts run on the processor board of the HIL system in real time, i.e., synchronously with the model, so all test actions are performed on a real-time basis – 100% reproducibly.                                    

  • DSPACE ECU FLASH PROGRAMMING TOOL

    DSPACE ECU FLASH PROGRAMMING TOOL

    ECU flash programming via measurement and calibration interfaces.
    The dSPACE ECU Flash Programming Tool lets you program the flash memory of ECUs that are equipped with a DCI‑GSI1 or DCI‑GSI2, ECUs with XCP on CAN, or ECUs with XCP on Ethernet.

  • RTI AUTOSAR BLOCKSET

    RTI AUTOSAR BLOCKSET

    MATLAB®/Simulink®-based and AUTOSAR-based co-development, validation and prototyping on MicroAutoBox II. The RTI AUTOSAR Blockset is an extension to Real-Time Interface (RTI) with a focus on rapid control prototyping, and ECU software testing and validation.

     

  • dSPACE ENGINEERING SERVICES

    dSPACE ENGINEERING SERVICES

    dSPACE systems are easy to get up and running – however, if a project is more complex, if individual solutions are needed or if there is high time pressure, you can trust dSPACE's fast, competent and reliable engineering and consulting services. Experienced engineers support you with small-scale project aid as well as with complete turn-key solutions.

  • RTI FPGA PROGRAMMING BLOCKSET

    RTI FPGA PROGRAMMING BLOCKSET

    Integrating FPGA models in dSPACE systems.

    The RTI FPGA Programming Blockset is a Simulink blockset for using an FPGA model created with the Xilinx® System Generator Blockset with a dSPACE system.                                        

  • dSPACE INTERNAL BYPASSING SERVICE

    dSPACE INTERNAL BYPASSING SERVICE

    Using an existing ECU for function development.

    The dSPACE Internal Bypassing Service supports service-based bypassing directly on the target ECU.
    The service can be integrated into the ECU software either by inserting it into the source code manually or by using the ECU Interface Manager.

  • SIMULATOR HARDWARE

    SIMULATOR HARDWARE

    Hardware-in-the-loop simulators and simulator-specific hardware for ECU testing. SCALEXIO fulfills all the new requirements that our hardware-in-the-loop customers have encountered over the last few years. 

     

  • dSPACE XCP SERVICE

    dSPACE XCP SERVICE

    Measurement, calibration, bypassing, and ECU flash programming via XCP.
    The dSPACE XCP Service is designed for various use cases during ECU development, such as measuring ECU variables and calibration, and also for ECU flash programming in connection with CAN. 

  • SYNECT

    SYNECT

    SYNECT is a data management and collaboration software tool with a special focus on model-based development and ECU testing. It helps you handle models, signals, parameters, tests, test results, etc., as well as their dependencies, versions and variants, and the underlying requirements throughout the entire development process. 

  • ELECTRONIC LOAD EMULATION (VOLTAGE RANGE: UP TO 800 V)

    ELECTRONIC LOAD EMULATION (VOLTAGE RANGE: UP TO 800 V)

    Electronic load module for simulating an electric motor at power level at high voltages. The electronic load module emulates electric machines at power level up to 800 V during hardware-in-the-loop simulation. This makes it ideally suited for testing electric drive systems, including the power stages.

     

  • SYSTEMDESK®

    SYSTEMDESK®

    System Architecture Software. SystemDesk is a system architecture tool that provides sophisticated and extensive support for modeling AUTOSAR architectures and systems for application software. 
    Additionally, SystemDesk generates virtual ECUs (V-ECUs) out of the application software.

  • EQUIPAMENTOS PARA AQUISIÇÃO, GRAVAÇÃO E REPRODUÇÃO DE DADOS EM ALTA PERFORMANCE - ZODIAC DATA SYSTEMS

    EQUIPAMENTOS PARA AQUISIÇÃO, GRAVAÇÃO E REPRODUÇÃO DE DADOS EM ALTA PERFORMANCE - ZODIAC DATA SYSTEMS

    Zodiac Data Systems. 
    Zodiac Data Systems designs, manufactures and supplies a broad range of high technology products and solutions, under the product trade names IN-SNEC, ENERTEC, HEIM for Aerospace & Defense and industrial applications in the fields of:

  • TARGETLINK

    TARGETLINK

    Automatic generator for production code (IEC 61508 and certified to ISO26262).

     

     

     

     

                                                  

  • EXPANSION BOXES

    EXPANSION BOXES

    By using Expansion Boxes, you can expand your host PC to create a large dSPACE system. There are three versions of Expansion Boxes: PX4, PX10, and PX20 (for 4, 10 or 20 boards, respectively). Expansion Boxes offer space for inserting up to 20 boards from the dSPACE modular hardware.

  • VEOS

    VEOS

    Platform for PC-based simulation.

    VEOS is a PC-based simulation platform for validating the software of electronic control units (ECUs) in early development process stages. A wide range of models − function models, virtual ECUs, bus systems, and plant models – can be simulated with VEOS independently of any specific simulation hardware.

  • LINK BOARDS

    LINK BOARDS

    Connecting a host PC with dSPACE systems. Link Boards let you connect a host PC with dSPACE systems. You can also spatially partition the PHS bus by arranging the I/O boards in several expansion boxes. The box that contains the processor board is the master.                                                                                    

  • XSG ELECTRIC COMPONENTS

    XSG ELECTRIC COMPONENTS

    Application Area
    Electric motor control applications that demand very high precision and correspondingly high sample rates are simulated best on field-programmable gate arrays (FPGAs). Closed-loop simulations of electric devices and their controls are supported at very high sampling rates in real time.

  • MICROAUTOBOX II

    MICROAUTOBOX II

    Compact and robust prototyping system for in-vehicle applications.

    MicroAutoBox II is a real-time system for performing fast function prototyping. It can operate without user intervention, just like an ECU.

     

  • XSG UTILS LIBRARY

    XSG UTILS LIBRARY

    Faster implementation of FPGA models.

    The XSG Utils Library offers ready-to-use function blocks for rapid control prototyping or hardware-in-the-loop (HIL) simulation projects. The library gives users of real-time FPGA applications enhanced function blocks for implementing their own projects.

  • MICROLABBOX

    MICROLABBOX

    Compact prototyping unit for the laboratory. With MicroLabBox, dSPACE introduces a fully new system category: an all-in-one development system for the laboratory that combines compact size and low system costs with high performance and versatility.

Contáctenos sobre este Producto

Para más información, por favor complete este formulario y nos comunicaremos con usted tan pronto como sea posible.
Por favor, complete todos los campos requeridos .
TOP